Search for: All records

Several research studies have investigated the degradation of BaTiO3-based dielectric capacitor materials, focusing on the impact of composition, defect chemistry, and microstructural design to limit the electromigration of oxygen vacancies under electric fields at finite temperatures. Electromigration can be a dominant mechanism that controls failure rates in the individual multilayer ceramic capacitor (MLCC) components in testing the reliability of failures with highly accelerated lifetime testing (HALT) to determine the mean time to failure of MLCCs surface mounted onto printed circuit boards (PCBs). Conventional assumptions often consider these failures as independent, with no interaction between components on the PCB. However, this study employs a Physics of Failure (PoF) approach to closely examine transient degradation and its impact on MLCC reliability, emphasizing thermal crosstalk and its influence on dependent and independent failure rates. Finite element analysis thermal modeling and infrared thermography were used to assess the impact of circuit layout and component spacing on heat dissipation and thermal crosstalk under various electrical stress conditions. The study distinguishes between dependent and independent failures under a HALT, quantified through a β′ factor reflecting common cause failures due to thermal crosstalk. Through a series of experimental and statistical analyses, the β′ factor is evaluated with respect to temperature, voltage, and component spacing. These insights highlight the importance of understanding the nature of the data in reliability testing of MLCCs and optimizing the layout design of high-density circuits to mitigate dependent failures, improving overall reliability and informing better design and packaging strategies. 

The ultra-wide bandgap (UWBG) energy (∼5.4 eV) of α-phase Ga2O3 offers the potential to achieve higher power switching performance and efficiency than today's power electronic devices. However, a major challenge to the development of the α-Ga2O3 power electronics is overheating, which can degrade the device performance and cause reliability issues. In this study, thermal characterization of an α-Ga2O3 MOSFET was performed using micro-Raman thermometry to understand the device self-heating behavior. The α-Ga2O3 MOSFET exhibits a channel temperature rise that is more than two times higher than that of a GaN high electron mobility transistor (HEMT). This is mainly because of the low thermal conductivity of α-Ga2O3 (11.9 ± 1.0 W/mK at room temperature), which was determined via laser-based pump-probe experiments. A hypothetical device structure was constructed via simulation that transfer-bonds the α-Ga2O3 epitaxial structure over a high thermal conductivity substrate. Modeling results suggest that the device thermal resistance can be reduced to a level comparable to or even better than those of today's GaN HEMTs using this strategy combined with thinning of the α-Ga2O3 buffer layer. The outcomes of this work suggest that device-level thermal management is essential to the successful deployment of UWBG α-Ga2O3 devices. 

Gallium nitride (GaN) high electron mobility transistors (HEMTs) are key components enabling today’s wireless communication systems. However, overheating concerns hinder today’s commercial GaN HEMTs from reaching their full potential. Therefore, it is necessary to characterize the respective thermally resistive components that comprise the device’s thermal resistance and determine their contributions to the channel temperature rise. In this work, the thermal conductivity of the GaN channel/buffer layer and the effective thermal boundary resistance (TBR) of the GaN/substrate interface of a GaN-on-SiC wafer were measured using a frequency-domain thermoreflectance technique. The results were validated by both experiments and modeling of a transmission line measurement (TLM) structure fabricated on the GaN-on-SiC wafer. The limiting GaN/substrate thermal boundary conductance (TBC) beyond which there is no influence on the device temperature rise was then quantified for different device configurations. It was determined that this limiting TBC is a function of the substrate material, the direction in which heat primarily flows, and the channel temperature. The outcomes of this work provide device engineers with guidance in the design of epitaxial GaN wafers that will help minimize the device’s thermal resistance. 

Featuring broadband operation and high efficiency, gallium nitride (GaN)-based radio frequency (RF) power amplifiers are key components to realize the next generation mobile network. However, to fully implement GaN high electron mobility transistors (HEMT) for such applications, it is necessary to overcome thermal reliability concerns stemming from localized extreme temperature gradients that form under high voltage and power operation. In this work, we developed a deep-ultraviolet thermoreflectance thermal imaging capability, which can potentially offer the highest spatial resolution among diffraction-limited far-field optical thermography techniques. Experiments were performed to compare device channel temperatures obtained from near-ultraviolet and deep-ultraviolet wavelength illumination sources for the proof of concept of the new characterization method. Deep-ultraviolet thermoreflectance imaging will facilitate the study of device self-heating within transistors based on GaN and emerging ultra-wide bandgap semiconductors (e.g., β-Ga2O3, AlxGa1-xN, and diamond) subjected to simultaneous extreme electric field and heat flux conditions.